Mikrotik Hotspot Quick Setup Guide + Tips n Tricks for Hotspot

# HOTSPOT server,

• It will also configure DHCP to assign users IP Addressfrom 10.10.10.1-10.10.10.254 ip  pool .
  Change it accordingly.
• I will add two Speed / Rate Limit Profiles, 256k and 512k, it will add a new user ‘narayan‘ password=narayan with 512k profile and user ‘gerendra‘ Password=gerendra with 256k  Limit.
• It will Add Default Route to internet which is DSL router ip 192.168.5.2 ,
  Change it accordingly.# HOTSPOT server,
  • It will also configure DHCP to assign users IP Address from 10.10.10.1-10.10.10.254 ip pool .
    Change it accordingly.
  • I will add two Speed / Rate Limit Profiles, 256k and 512k, it will add a new user ‘narayan‘ password=narayan with 512k profile and user ‘gerendra‘ Password=gerendra with 256k  Limit.
  • It will Add Default Route to internet which is DSL router ip 192.168.2.2 ,
    Change it accordingly.

In this examples, Mikrotik have two interface cards.

• Ether1 LAN = 10.10.10.1  / Connected with LAN/Hotspot users
• Ether2 WAN = 192.168.5.1 / Connected with DSL router
• DSL Router = 192.168.5.2

Script Starts Below. copy and paste New Terminal.

# Configure IP address for LAN and WAN interfaces / narayan

/ip address

add address=10.10.10.1/24 comment=LAN disabled=no interface=ether1 network=10.10.0.0

add address=192.168.5.1/24 comment=WAN disabled=no interface=ether2 network=192.168.5.0

# ADD IP pool for hotspot users

/ip pool

add name=hs-pool-1 ranges=10.10.0.10-10.10.0.254

# Add GOOGLE DNS for resolving

/ip dns

set allow-remote-requests=yes cache-max-ttl=1w cache-size=10000KiB max-udp-packet-size=512 servers=8.8.8.8

# Add DHCP Server

/ip dhcp-server

add address-pool=hs-pool-1 authoritative=after-2sec-delay bootp-support=static disabled=no interface=ether1 lease-time=1h name=dhcp1

# Add DHCP Server

/ip dhcp-server

add address-pool=hs-pool-1 authoritative=after-2sec-delay bootp-support=static disabled=no interface=ether1 lease-time=1h name=dhcp1

/ip dhcp-server config set store-leases-disk=5m

/ip dhcp-server network add address=10.10.0.0/24 comment="hotspot network" gateway=10.10.10.1

# Add HOTSPOT profile

/ip hotspot profile

set default dns-name="" hotspot-address=0.0.0.0 html-directory=hotspot http-cookie-lifetime=3d http-proxy=0.0.0.0:0 login-by=cookie,http-chap name=default rate-limit="" smtp-server=0.0.0.0 split-user-domain=no use-radius=no

add dns-name=login.aacable.net hotspot-address=10.10.0.1 html-directory=hotspot http-cookie-lifetime=1d http-proxy=0.0.0.0:0 login-by=cookie,http-chap name=hsprof1 rate-limit="" smtp-server=0.0.0.0 split-user-domain=no use-radius=no

/ip hotspot

add address-pool=hs-pool-1 addresses-per-mac=2 disabled=no idle-timeout=5m interface=ether1 keepalive-timeout=none name=hotspot1 profile=hsprof1

# Add HOTSPOT User Profile like 256k and 512k

/ip hotspot user profile set default idle-timeout=none keepalive-timeout=2m name=default shared-users=1 status-autorefresh=1m transparent-proxy=no add address-pool=hs-pool-1 advertise=no idle-timeout=none keepalive-timeout=2m name="512k Limit" open-status-page=always rate-limit=512k/512k shared-users=1 status-autorefresh=1m transparent-proxy=yes add address-pool=hs-pool-1 advertise=no idle-timeout=none keepalive-timeout=2m name="256k Limit" open-status-page=always rate-limit=256k/256k shared-users=1 status-autorefresh=1m transparent-proxy=yes /ip hotspot service-port set ftp disabled=yes ports=21 /ip hotspot walled-garden ip add action=accept disabled=no dst-address=10.10.10.1 /ip hotspot set numbers=hotspot1 address-pool=none /ip firewall nat add action=masquerade chain=srcnat disabled=no /ip hotspot user add disabled=no name=admin password=123 profile=default add disabled=no name=zaib password=test profile="512k Limit" server=hotspot1 add disabled=no name=test-256k password=test profile="256k Limit" server=hotspot1 /ip route add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.5.2 scope=30 target-scope=10